SAMZON Pile-Turner is a stationary machine used for changing the pallet under a product. This model is often used in the paper-industry.
Samzon Pile-turner 104L pile-turner is a stationary machine used for changing the pallet under a product. This model is often used in the paper-industry.
A major advantage with this machine is that the platforms can close-down to 320mm, which means the Samzon Pile-turner can handle very low products.
Samzon Pile-turner closes around the product with platforms, tilts back by 90 degrees, the tower is released and is rotated manually 180 degrees and once again locked. The bottom platform is then lowered back down, the platforms open, and the products has been placed on a new pallet.
The pallet is fed into the machine using a pallet truck or pallet jack.
The pallet turner can be delivered with a variety of extra equipment and surface treatments.
The pallet turner can be delivered with various additional equipment and surface treatment.
Interested in a Pile-Turner?
Fill out our form, and we will get in touch:
The pallet and pile-turner machine is primarily used to switch out damaged products at the bottom of a pallet or to remove spacers from between the products.
By using the pile-turner machine it is possible to tip the products over onto a new pallet or switch out damaged products without having to move all the products manually from one pallet to another.
The necessity to handle heavy products is removed to reduce the amount of work-related injuries and daily wear on coworkers and thereby improve your company HSE.
This machine can also be used for daily replacements of old pallets. However, the new pallet has to be placed manually on top of the products by the operator.
The Pile-Turner is usually smaller in size, compared to the pallet changer, it is less costly and comes with a relatively fast delivery time.
The SAMZON Pile-Turner machine works by moving the pallet back in horisontal and rotating the original pallet 180-degrees, thereby turning the product on its head. Then, the pallet is manually removed from the machine and replaced with a new pallet.
The pile-turner takes slightly longer time to complete a pallet exchange cycle, when compared to the pallet changer, and does require that the product can sustain being turned around.
However, one of the advantage with the pile-turner is that it can be stopped at 90-degrees, allowing the platforms to separate ever so slightly. You can now remove cardboard, paper, or freezer spacers that may be lying in between the products.
The machine comes with both manual control or automatic cycle, and will be able to change up to 30 pallers per hour.
The advantage of using a pallet changer is that you avoid all manual handling of products and pallets when performing a pallet change.
This machine can change approximately 30 pallets an hour and can handle a large variety of products.
The pallet changer can work with manual stage control using buttons, automatic cycles, automatic pallet placement, and an in-line fully automatic assembly line part including a pallet magazine that allows for automatic pallet management.
The in-line solution offers a large amount of tailored, customer-specific solutions to meet your exact needs.
There are lots of options for additional equipment when you order a pile-turner. See below for a selection of our most popular extra equipment including a description of each option.
The advantage in using an automated cycle is that you ensure that the operator only must press the start button on the control panel – the machine the runs through the entire sequence automatically.
This gives the operator time to handle pallets or other tasks in between sequences.
To use the automatic cycle, safety measures are required to ensure personnel cannot get under the machine during a cycle. Safety measures include safety fence and safety light barriers.
Unsure about which solution best matches your needs? Fill out this form and we will give you an offer on a machine that is tailored to your requirements, based on the given information.